Margin Adjustment - Lanier 5484 Operator's Manual

Copying

Margin Adjustment

You can shift the image left, right, top or bottom to make a binding margin.
A
2
Limitation
If you set too wide a margin, areas you do not want to delete might be erased.
Note
You can change the width of the binding margin as follows:
Metric version
Inch version
The margin width default is as follows. You can change this default setting
with the User Tools. See "Front Margin: Left/Right" "Back Margin: Left/
Right" "Front Margin: Top/Bottom" "Back Margin: Top/Bottom"
"Adjust Image".
Metric version
Inch version
When making two-sided copies from one-sided originals, you can set a bind-
ing margin for back pages. See "1
"Adjust Image".
A
Press the [Edit Image] key.
130
A
0 – 30 mm (in 1 mm steps)
0" – 1.2" (in 0.1" steps)
• Front: 5 mm Left
• Back: 5 mm Right
• Front: 0.2" Left
• Back: 0.2" Right
2 Duplex Auto Margin Adjust"
P.318
P.318