Table of Contents
Advertisement
Copying
Basic Functions
The following functions are explained in this section:
Copy Image Density
Auto Image Density, Manual Image Density, Combined Auto and Manual
Image Density
2
Original Types
Text, Auto Text/Photo, Photo, Pale, Generation Copy
Copy Paper Select
Auto Paper Select and Manual Paper Select
Auto Reduce/Enlarge
Reduce and Enlarge
Note
You can choose the default settings for all of the above features. The default
setting is the setting that is selected when Auto Reset is activated, Energy Sav-
er mode is exited, or when the machine is powered on. See "General Fea-
tures" in the System Settings manual or
You also can change other defaults for these functions. See
You Can Change with the User Tools".
Adjusting Copy Image Density
The copy image density is the relative brightness or darkness of copies.
There are three ways to select copy image density:
Auto Image Density
The machine automatically chooses a setting to match your original.
Manual Image Density
If you require darker or lighter copies, you may adjust the image density.
Combined Auto and Manual Image Density
Use when copying originals with a dirty background (such as newspapers).
You can adjust the foreground density while having the background density
selected automatically.
Note
In Connect Copy mode, make adjustments to copy image density on the mas-
ter unit.
• The image density level set on the master unit will be used by both units,
However, in order to produce similar images on both units, mark sure the
"Original Mode Level" settings are the same on each unit. If they are not
the same, the finish of images may differ.
34
P.312 "General Features".
P.314 "Original Mode Level"
P.312 "Settings
Advertisement
Table of Contents
