Changing Stored Program - Lanier 5484 Operator's Manual

Changing Stored Program

A
Press the stored program number key and make sure the settings.
Note
When you want to check the contents of the program, recall the program.
See P.59 "Recalling a Program"
B
Repeat the steps A and D in Storing a Program.
To overwrite the program
A Press the [Yes] key.
Important
If you select [Yes], the previous program is lost.
B Enter the program name with the letter keys on the display panel, then
press the [OK] key.
Do not to overwrite the program
A Press the [No] key.
Programs
2
57