Manual Mode; Time Mode; Manual Weld Mode; Navigate To Time Mode - Dukane iQ Series User Manual

User's Manual User's Manual
Manual Mode is the Default
When the generator is first powered up, the default
operating mode is Manual - Figure 5-1.

Navigate to Time Mode

1. Follow the sequence shown in the figures to the right
to navigate from Manual mode to Time mode.
In Manual mode, press the TIME key (Figure 5-2).
2. The phrase, Enter Changes Mode, means when the
ENTER key is pressed, the mode will change. So
press the ENTER key, and the Weld by Time screen
seen in Figure 5-3 appears.
3. Set the time.
Use the and the
and to set the digits for the weld time you want.
4. Press the ENTER key to accept the time that has been
set (Figure 5-4).
Press the CANCEL key if you decide not to set the
time.
Page 4 Page 4
+ -
keys to move the cursor
Manual Weld
Weld Time 0.000 S
Weld Energy 0 J
# 2
Figure 5-1 Manual Weld Mode
Manual Weld
Weld by Time
OFF
Enter Changes Mode
Figure 5-2 Navigate to Time Mode
Weld by Time
Weld Time
OFF S
Hit Enter To Accept
Hit Cancel To Abort
Figure 5-3 Time Weld Mode - 1
Weld by Time
Weld Time
0.500 S
Hit Enter To Accept
Hit Cancel To Abort
Figure 5-4 Time Weld Mode - 2
Dukane Manual Part No. 403-577-00
TIME key
ENTER key
Set the time.
ENTER key
Weld
Wel
0
Hit Ent
Hit Can
Weld
We
Hit E
Hit C