Energy Mode; Navigate To Energy Mode - Dukane iQ Series User Manual

Navigate to Energy Mode

1. Follow the sequence shown in the figures to the right
to navigate from Time mode to Energy mode.
In Time mode (Figure 5-5), press the ENERGY key,
and the screen as shown in Figure 5-6 appears.
2. The phrase, Enter Changes Mode, means when the
ENTER key is pressed, the mode will change. So
press the ENTER key, and the Weld by Energy screen
seen in Figure 5-6A appears.
3. Use the and the
and to set the digits for the energy you want - Figure
5-7.
4. Press the ENTER key to accept the energy that has
been set. Press the CANCEL key if you decide not to
set the energy.
5. If you set the energy level, a maximum weld time
needs to be set also. Set a time that is reasonable for
your application. [The factory default for this time is
30 seconds (also the maximum).]
The time can not be set below 0.001 second.
Use the and the
and to set the digits for the time you want.
See Figure 5-8.
Dukane Manual Part No. 403-577-00
+ -
keys to move the cursor
+ -
keys to move the cursor
Weld by Time
Weld Time 0.500 S
Weld Energy 00 J
# 2
Figure 5-5 Time Weld Mode
Weld By Time
Weld By Energy
OFF
Enter Changes Mode
Figure 5-6 Navigate to Energy Mode - 1
Weld By Energy
Weld Energy
OFF J
Hit Enter To Accept
Hit Cancel To Abort
Figure 5-6A Navigate to Energy Mode - 2
Weld By Energy
Weld Energy
27 J
Hit Enter To Accept
Hit Cancel To Abort
Figure 5-7 Energy Weld Mode - 1
Weld By Energy
Maximum Weld Time
1.000 S
Figure 5-8 Energy Weld Mode - 2
Section 5 - Menu Structure Section 5 - Menu Structure
ENERGY
key
ENTER key
Set energy
level.
ENTER key
Page 5 Page 5
We
W
Hit
Hit C
We
W
Hit
Hit