Compliance Standards - RayTek Raynger Series 3i Plus Operating Instructions Manual

Appendix

10.3 Compliance Standards

IEC 61010-1 Safety Requirements for Electrical Equipment for Measurement, Control, and Laboratory
Use -- Part1: General Requirements
IEC 60529 Degrees of Protection Provided by Enclosures (IP Code)
EN 61326-1 Electrical Equipment for Measurement, Control and Laboratory Use – EMC
Requirements --- Part1 : General Requirements
EN 61326-2-2 Electrical Equipment for Measurement, Control and Laboratory Use --EMC
Requirements – Part 2-2 : Particular Requirements – Test Configurations, Operational Conditions and
Performance Criteria for Portable Test, Measuring and Monitoring Equipment Used in Low-Voltage
Distribution Systems
CISPR 11 Industrial, Scientific and Medical Equipment –Radio-Frequency Disturbance
Characteristics –Limits and Methods of Measurement
EN 60825-1 Safety of Laser Products – Part 1 : Equipment Classification and Requirements
FDA 21 CFR 1040.10, 1040.11 with Laser Notice 50 Performance Standards for Light-Emitting
Products ---Laser Products
IEC 62133 Secondary Cells and Batteries Containing Alkaline or other non-acid Electrolytes — Safety
Requirements for Portable Sealed Secondary Cell, and for Batteries Made from Them, for Use in
Portable Applications
UN 38.3 Recommendations on the Transport of Dangerous Goods, Manual of Test and Criteria –
Lithium Batteries
EN 300328 Electromagnetic Compatibility and Radio Spectrum Matters (ERM); Wideband
Transmission System; Data Transmission Equipment Operating in the 2.4 GHz ISM Band and Using
Wide Band Modulation Techniques; Harmonized EN Covering Essential Requirements under Article
3.2 of the R&TTE Directive
3i Plus 59
info@Raytek-Direct.com 1.888.475.5235
Rev. A1 Jan 2015