To Default; Log - RayTek Raynger Series 3i Plus Operating Instructions Manual

5.10.10.7 To Default

To restore the instrument to the original factory default settings, press the <To Default> soft key. The
following table provides the values in case of a factory default.

5.10.11 Log

This menu allows reviewing or deleting of previously stored temperature records.
To review temperature records follow the steps given below:
1.
2.
Additionally, pushing the <Delete> soft key allows you to remove an individual or all sets of the
temperature record.
3i Plus
info@Raytek-Direct.com
Parameter
White Backlight
Orange Backlight
Scope
Laser
Buzzer
Date
Date Format
Time
Time Format
Bluetooth Enable
Language
Temperature Unit
Emissivity
Transmissivity Enable
Transmissivity
Background Compensation Enable
Background Compensation Temperature
High Alarm Enable
High Alarm Temperature
Low Alarm Enable
Low Alarm Temperature
Trend Curve Upper-Limit
Trend Curve Lower-Limit
Trend Curve Limit Mode
Trend Time Span
Push the <Menu> soft key until <Log> shows as the right soft key function.
Push the <Log> soft key and the select the temperature record of interest (Profile, Basic, or
Trend) to review it.
Factory Default
OFF
OFF
OFF
OFF
OFF
2014.01.01
DD/MM/YY
00:00:00
24-Hour
False
English
Celsius
1.00
OFF
100%
OFF
25°C (77°F)
OFF
Upper limit of measurement range
OFF
Lower limit of measurement range
Upper limit of measurement range
Lower limit of measurement range
Auto
200 ms
Table 4: Factory Default Values
Rev. A1 Jan 2015
Operation
29
1.888.475.5235