Sharp MX-M260 Service Manual page 51

Detection size when 8.5" x 13" document/paper is used.
Employed Destina
unit tion
AB
series
Document
Docu
table/
ment
RSPF
Inch
series
Machine All
paper feed destina
tray tions
AB
series
Paper
Manual
paper feed
tray
Inch
series
A4/LT (8.5" x 11") detection enable/disable setup
In the inch series, Letter is detected as A4; in the AB series, A4 is
detected as Letter.
Set value Setup
0 Detection invalid
1 Detection valid
Detection size when A4/LT (8.5" x 11") document/paper is used.
Employed Destina
unit tion
AB
series
Document
Docu
table/
ment
RSPF
Inch
series
Machine All
paper feed destina
tray tions
Paper
Manual All
paper feed destina
tray tions
26-3
Purpose Setting
Used to set the specifications of the auditor.
Function
Setting must be made depending on the use condition
(Purpose)
of the auditor.
Section Auditor
Item Specifications
Set value
Document
0 1
size
(Invalid) (Valid)
FC FC
B4
(8.5" x 13") (8.5" x 13")
LG FC
B4
(8.5" x 14") (8.5" x 13")
FC
B4 B4
(8.5" x 13")
FC LG FC
(8.5" x 13") (8.5" x 14") (8.5" x 13")
LG LG FC
(8.5" x 14") (8.5" x 14") (8.5" x 13")
WLT WLT
B4
(11" x 17") (11" x 17")
– Set with key operations.
FC LG FC
(8.5" x 13") (8.5" x 14") (8.5" x 13")
LG LG FC
(8.5" x 14") (8.5" x 14") (8.5" x 13")
B4 B4 B4
FC LG FC
(8.5" x 13") (8.5" x 14") (8.5" x 13")
LG LG FC
(8.5" x 14") (8.5" x 14") (8.5" x 13")
B4 B4 B4
Remarks
Default
Set value
Document
0 1
size
(Invalid) (Valid)
LT
A4 A4
(8.5" x 11")
LT LT
A4
(8.5" x 11") (8.5" x 11")
LT
A4 A4
(8.5" x 11")
LT LT
A4
(8.5" x 11") (8.5" x 11")
Set with key
–
operations.
Regardless of the
–
simulation setup.
MX-M260/M310/M260N/M310N SIMULATION 6 - 18
Operation/procedure
Select the mode corresponding to the auditor specification mode with
the 10-key.
Item Content
0 P10 Built-in auditor mode
1 VENDOR Coin vendor mode
2 OTHER Others
When "1: VENDOR (Coin vendor mode)" is set, the following three
items of key operation setting are changed.
1) Set the LCD backlight change inhibit to "1: OFF (Enable)."
2) When SIM 26-6 destination setting is set to "0: Japan," duplex copy
inhibit setting must be set to "0: ON (Inhibit)."
3) Set the sort automatic selection to "0: OFF (Disable)."
26-5
Purpose Setting
Function Used to set the count mode of the total counter and the
(Purpose) maintenance counter.
Item Specifications
Operation/procedure
Used to set the count up number (1 or 2) when an A3/WLT paper
passes through.
For the drum counter and the developer counter, double count is
employed unconditionally.
(Target counter selection)
Item
1 TOTAL COUNTER
2 MAINTENANCE COUNTER
Used to set the count up number of the selected counter.
Item Content
1 SINGLE COUNT Single count
2 DOUBLE COUNT Double count
26-6
Purpose Setting
Function Used to set the specifications depending on the
(Purpose) destination.
Item Specifications
Operation/procedure
Select the destination with the 10-key.
By changing the destination, some other setting items may be changed.
Item Content
0 JAPAN Japan
1 SEC SEC
2 SECL SECL
3 SEEG SEEG
4 SUK SUK
5 SCA SCA
6 SEF SEF
7 INEG EX inch series
8 ABEG EX AB series
9 INEF EX inch series (FC)
10 ABEF EX AB series (FC)
11 CHINESE China
12 TAIWAN Taiwan AB
13 SEEG2 SEEG2
14 TAIWAN2 Taiwan China
Setting
Default
range
0-2 0
Counter
Content
Total counter
Maintenance counter
Setting range Default
1-2 2
Destination
Setting
Default
range
0-14 0