Sharp MX-M260 Service Manual page 35

START (Normal mode)
Press the #/P key.
Press the asterisk (*) key.
Press the clear key.
4
Press the asterisk (*) key.
Standby for entry of
SIM code.
Enter the main code of
SIM with the 10-key.
The main code of SIM
is displayed.
3
Press the START key.
NO
Is there a sub code ?
YES
Standby for entry of
SIM sub code.
Enter the sub code of
SIM with the 10-key.
2
Press the START key.
NO
Is there a item
selection?
YES
Select the mode and the
item with the ↑ ↓ key
and the item key.
YES
Operation check ?
NO
YES
Operating conditions
check ?
NO
YES
Data clear ?
NO
Adjustments
NO
or setting (counter data
change) ?
YES
The display is made according
to the selected mode and the item.
Do you
NO
want to change the
content ?
YES
Enter the new setting and
adjustment values.
L1
MX-M260/M310/M260N/M310N SIMULATION 6 - 2
L1
∗
Press the START key.
1
The changed content
is stored.
Do you
YES
want to end the
simulation ?
NO
Do you want
NO
to perform another
simulation ?
YES
Press the SYSTEM
SETTINGS key
YES
Is it the same
simulation ?
NO
Press the SYSTEM
SETTINGS key
4
Press the START key.
Operation is made according
to the selected mode and item.
Press the START key.
Operation is made according
to the selected mode and item.
Press the START key.
Select "YES".
The selected mode and
the item are cleared.
Operation is made according
to the select ed mode and the it
(Other modes)
1
In the cause of SIM which is set by touch panel, the
changed content can be stored by the following key, touch.
·
[OK] key
·
Other item selection
·
↑ ↓ key
Press the clear all key.
The simulat ion mode
is canceled.
Returns to START
(Normal mode).
2
3
If "Operation condition check"
refer to "Sensor display", this
process is not necessary.