Installing The Internal Cooling Fan - Dell E30S002 Manual

Figure 52. Removing the internal cooling fan
Next steps
1 Follow the procedure listed in
2 Install the internal cooling fan.
Related link
Removing the air shroud

Installing the internal cooling fan

Installing the internal cooling fan
Prerequisites
1 Follow the safety guidelines listed in
2 Follow the procedure listed in
3 Remove the air shroud.
4 If installed, remove the front bezel.
Steps
1 Hold the cooling fan by the sides with the cable end facing the bottom of the system.
2 Align the four tabs on the internal cooling fan with the four slots on the system wall.
3 Press and slide the internal cooling fan into the slots until the release tab locks into place.
4 Connect the internal cooling fan power cable to the connector on the system board.
After working inside your system.
Safety instructions.
Before working inside your system.
Installing and removing system components
Installation and Service Manual 103