Connecting A Boiler Without Thermostat Input; Controlling Electric Convectors; Controlling A Heat Pump - DELTA DORE TYBOX 610 Installation Manual

Connecting a boiler without thermostat
input
If the boiler does not have a thermostat
input, you can directly control the circula-
tor which is located next to the boiler (the
pump enabling circulation of the hot water
into the radiators).
- Directly control the power supply to the
circulator using the thermostat.
thermostat
1
2
3
mains power
L
230 V/50 Hz
N
circulator

Controlling electric convectors

To control electrical convectors, you MUST
use a power contact switch that is suitable
for the total power to be controlled.
This power contactor switch must be fitted
into the electrical switchboard of your home.
thermostat
L
mains power
230 V/50 Hz
1
L
2
N
3
N
contact switch (not supplied)
fitted in the electrical
power supply of
switchboard
the contact
switch coil
convector(s)
- 8 -

Controlling a heat pump

Heat pump Heat pump
with thermostat input with thermostat heat input
and summer / winter Input and thermostat cool input
1
2
3
Hydraulic kit
Thermostat
input
Summer /
Underfloor
winter Input
Underfloor
heating
heating
Summer /
output
output
winter switch
Geothermal OR Air source Geothermal OR Air source
Select cabling that is suitable for your heat pump or refer directly to the manufacturer's
specifications.
Heat pump
with thermostat input
and Summer / winter switch
1 1
2 2
3 3
Hydraulic kit
Hydraulic kit
Thermostat Thermostat
heat input
input
Commun
Summer winter
Thermostat
Summer /
cool input Summer / Underfloor
winter switch
winter switch heating
output
Geothermal OR Air source
- 9 -