DELTA DORE TYBOX 610 User Manual

TYBOX 610
Weekly programmable thermostat
User guide
1234567
i
0h 0h 2 2 4 4
TYBOX
This appliance is compliant with the requirements of
directives 2004/108/EC (Electromagnetic Compatibility)
and 2006/95/EC (Low-Voltage Safety)
• Carefully read these instructions prior to installation.
• Do not attempt to repair the unit yourself; an after-sales service is available.
Because of changes in standards and equipment, the characteristics given in the text and the illustrations provided in this
document are not binding unless expressly confirmed
4 - Programming
Turn the selector dial to the position marked
The default programme is a Comfort period from 6.00am to 11.00pm.
• Create your programme
Programming starts on day 1 at midnight. Press the
to create different Setback or Comfort periods (in 1/2 hour intervals).
There are 2 possibilities for confirming
your programme:
• Confirm and copy the programme
to the next day
Hold down the OK button for 3 seconds to
confirm and copy the programme you just
created to the next day.
OR
• Confirm the programme
Press the OK button to confirm and go to
programming for the next day.
The return key is used to modify a programme by returning to a specific time slot
5 - Automatic mode
Turn the selector dial to the position marked
to the programme.
Request for
heat or cold
Current day
Time
Information
button
NOTE:
By default, your unit will continuously display the set-point temperature. If you want to modify this
parameter, please refer to the CF02 menu of the "installation guide", or contact your installer.
6 6 8 8 10 12 14 16 18 20 22 24 10 12 14 16 18 20 22 24
AUTO AUTO
PROG PROG
or buttons
Days 1st time slot
Set one 1/2 hour
period in setback mode
Return
button
Set one 1/2 hour
period in comfort mode
. Your thermostat will function according
Room Current
temperature mode
Current day Absence Timer
programming button mode button
1 - Description
Thermostat
Information
button
Selector dial
2 - Time setting
Turn the selector dial to the position marked
• Press + or - to set the day, then OK to confirm and
go to the next setting.
Repeat these steps to set the hours and minutes.
To exit the "time setting" mode, turn the selector dial.
3 - Set-point temperature setting
This mode is used to select the setback and
comfort set-point temperatures.
Turn the selector dial to
• Press + or - to set the comfort temperature,
then confirm with OK to move to the next
setting for the setback temperature.
Confirm again with OK.
The set-point temperatures are adjustable
from 5 to 30°C in heating mode and from
18 to 35°C in cooling mode in steps of
0.5°C. To set the cooling set-point tempe-
ratures, switch the thermostat to cooling
mode (refer to the heating / cooling mode
change menu).
Note:
Only the setback set-point temperature
will be available to you if you have opted
for the comfort setting for every radiator
(menu CF03) of the "installation guide".
Example: Comfort from 6.30am to
8.30 am and 5.30 pm to 11.00 pm
Press
Confirmation
button
Press
Press
6 - Timer mode
Duration of timer mode
Cancel Setting the duration
Cancel Temperature
setting
Return to AUTO mode at the end of the countdown
Selector dial
Modification
buttons (function
dependent)
Automatic mode
Manual mode
Shutdown
Set-point
temperature setting
The day numbers flash.
.
Days
Setting the comfort
Setting the setback
0h 6h30 8h30
Press
up to 06:30
Press
up to 08:30
up to 17:30
This mode is used to choose a particular
mode for a given amount of time.
In AUTO mode, press on the button
• Press + or - to set the duration that you
want (between 30 minutes and 72 hours),
then on OK to confirm.
Example: Timer mode for 30 minutes.
Confirmation
• Press + or - to set the set-point temperature
that you want (from 5 to 30°C for heating
mode and from 18 to 35°C for cooling
mode), then on OK to confirm and start the
countdown.
Set-point Confirm
temperature and begin
adjustment countdown
Press on OK during Timer mode to modify
the settings.
To cancel the current Timer mode,
press on the button
Time setting
Programming
Configuration mode
(1: Monday... 7: Sunday)
Hours Minutes
Confirmation
temperature
Confirmation
temperature
17h30 23h 0h
up to 23:00
up to 00:00
Copy and confirm,
or confirm