2 .
Pull the print platform handle (A) out from under the clamp .
NOTE: The part will hang down under the print platform .
CLEANING PARTS
The following equipment is needed for cleaning parts produced by the ProJet 1200 .
Glass containers with lids
•
16 oz,
•
3 .5 inch diameter opening (minimum)
•
This size will hold parts that are "ring height" .
Digital timer
99% isopropyl alcohol (IPA), optionally you may use 70% IPA
Ultrasonic cleaner (Optional)
•
Digital timer
•
Volume: 28 liter (0 .75 gal)
•
Stainless steel Tank: 9 x 5 x 4 inch
Warning: 99% and 70% Isopropyl Alcohol . Flammable liquid and vapor . Keep away from heat, spark and open
flames. Use with adequate ventilation. Store at 68-86°F. Do not take internally. Avoid prolonged or repeated
breathing of mist or vapor . Causes irritation to eyes and respiratory tract . Affects central nervous system . May
be harmful if absorbed through skin . May cause irritation to skin .
Wear Gloves: Always wear gloves when cleaning parts .
3D Systems, Inc.
A
32