Unpacking The Projet 1200 - 3D Systems ProJet 1200 User Manual

UNPACKING THE PROJET 1200

CAUTION: This procedure may require two persons . Ensure there are enough people to comfortably move the
printer to its final location. Dropping the printer and parts may damage them.
CAUTION: Ensure that you save all foam and packing material for the future repacking of your ProJet
1200 . Shipping the printer without original packing materials may cause damage to the printer and void the
manufacturer's warranty .
1 . Pull the grip handle tabs (A) .
2 . Remove the grip handles from the box.
3 . Lift the outer box off the printer.
3D Systems, Inc.
11
A