Table of Contents
Advertisement
3 .
Open the ProJet 1200 application . Double-click the
placed on your desktop during the software installation .
4 .
Select
File > Connect to
5 .
Select the name of the printer next to the IP address of your printer. Select
OK .
6 .
Test the connection by selecting
Curing .
NOTE: The curing chamber carousel should rotate if the printer is
connected .
3D Systems, Inc.
ProJet 1200
Printer .
File > Printer > Test Printer > Test Post
icon that was
22
Advertisement
Table of Contents
Need help?
Do you have a question about the ProJet 1200 and is the answer not in the manual?