Stopping The Engine From Lop - MTU 20 V 4000 M93 x Operating Instructions Manual

4.14 Stopping the engine from LOP

Preconditions
☑ Engine is running in local mode.
NOTICE
Stopping the engine when it is running at full load causes extreme stress to the engine.
Risk of overheating, damage to components!
• Before shutting down, disengage gear and run the engine at idle speed for at least 10 minutes
until engine temperatures have dropped and constant values are displayed.
Stopping the engine from LOP
Item
LOP
LOP
Temperature indications
LOP
70 | Operation | MS150048/04E 2013-07
Measure
Disengage gearbox (→ Page 55).
Operate engine at idle speed (→ Page 55).
Wait until engine temperatures do not fall any further.
Press STOP illuminated pushbutton (→ Page 55).
STOP button is illuminated.
•
• Engine at a standstill.