4.17 Stopping the engine from LOP
Preconditions
☑ Engine is running in local mode.
NOTICE
Stopping the engine when it is running at full load causes extreme stress to the engine.
Risk of overheating, damage to components!
• Before shutting down, disengage gear and run the engine at idle speed for at least 10 minutes until
engine temperatures have dropped and constant values are displayed.
Stopping the engine from LOP
Item
LOP
LOP
Temperature indications
LOP
106 | Operation | MS150047/05E 2018-08
Measure
Disengage gearbox (→ Page 87).
Operate engine at idle speed (→ Page 87).
Wait until engine temperatures do not fall any further.
Press STOP illuminated pushbutton (→ Page 87).
• STOP button is illuminated.
• Engine at a standstill.