MTU 20 V 4000 M93 x Operating Instructions Manual page 152

Checking strainer
Item
Strainer
Strainer
Square-section ring
O-ring
Cleaning strainer
1. Wash strainer (5) with cleaner.
2. Remove stubborn deposits with soft brush.
3. Blow out strainer (5) with compressed air from inside.
Installing strainer
1. Coat square-section ring (4) on strainer (5) with engine oil and install strainer (5).
2. Coat O-ring (3) with engine oil and fit in filter housing.
3. Fit cover (2) and secure with screws (1) and washers.
152 | Task Description | MS150048/04E 2013-07
Findings
Metallic residues
Damaged
Damaged
Damaged
Measure
• Clean
Monitor engine operation
•
Check strainer daily
•
Contact Service
•
Fit new part
Fit new part
Fit new part