Interface Module Plug Connections – Check - MTU 20 V 4000 M93 x Operating Instructions Manual

7.20.6 Interface module plug connections – Check
Preconditions
☑ Engine is stopped and starting disabled.
Checking EIM plug connections
1. Check both Tyco plugs (62-pole) (1) on EIM
for firm seating. Make sure that the clips
(2) are engaged.
2. Check screws (3) of cable clamps on EIM
for firm seating. Ensure that cable clamps
are not faulty.
180 | Task Description | MS150048/04E 2013-07