Engine Oil – Change - MTU 20 V 4000 M93 x Operating Instructions Manual

7.12.2 Engine oil – Change
Preconditions
☑ Engine is stopped and starting disabled.
☑ Engine is at operating temperature.
☑ MTU Fluids and Lubricants Specifications (A001061/..) are available.
Special tools, Material, Spare parts
Designation / Use
Torque wrench
Ratchet
Engine oil
Sealing ring
WARNING
Hot oil.
Oil can contain combustion residues which are harmful to health.
Risk of injury and poisoning!
• Wear protective clothing, gloves, and goggles / safety mask.
• Avoid contact with skin.
• Do not inhale oil vapor.
Oil change without semirotary hand pump: Draining oil via drain plug(s) on oil
pan
1. Provide a suitable container to collect the oil.
2. Remove drain plug(s) and drain oil.
3. Install drain plug(s) with new sealing ring.
Oil change using semirotary hand pump: Oil extraction
1. Provide a suitable container to collect the oil.
2. Extract all oil from oil pan using the semirotary hand pump.
Draining residual oil at equip-
ment carrier
1. Provide a suitable container to collect the
oil.
2. Remove drain plugs (1) and (2) and drain
oil:
• Approx. 12 liters at (1)
• Approx. 5 liters at (2)
3. Check oil indicator filter (→ Page 151).
4. Install drain plug(s) with new sealing ring.
(→ Spare Parts Catalog)
MS150048/04E 2013-07 | Task Description | 145
Part No. Qty.
F30027337 1
F30027341 1