Sony HVR-A1J Service Manual page 271

4-2. LS Cam Adjustment
Adjustment procedure
Enter the [FWD] mode.
1)
Loosen the cam plate fixing screws (special head screw M1.4 × 1.4) A and B by 90 degrees.
2)
Pressing the center of the LS chassis block with the force of 10.0 ± 1.0N•m (102.0 ± 10.2kgf•cm) while holding the cam plate fixing
3)
screw (special head screw M1.4 × 1.4) B with fingers.
While holding on the cam plate fixing screw (special head screw M1.4 × 1.4) B, tighten the cam plate fixing screw (special head screw
4)
M1.4 × 1.4) A.
Tightening torque: 0.098 ± 0.01 N•m (1.00 ± 0.1 kgf•cm)
Tighten the cam plate fixing screw (special head screw M1.4 × 1.4) B.
5)
Tightening torque: 0.098 ± 0.01 N•m (1.00 ± 0.1 kgf•cm)
LS cam plate fixing screw A
LS cam plate fixing screw B
HVR-A1J/A1U/A1N/A1E/A1P/A1C
Pressing the center of the LS
chassis block with the force of
10.0 ± 1.0N•m (102.0 ± 10.2kgf•cm)
while holding the cam fixing screw B .
Fig. 6-2-5
6-106