Sony HVR-A1J Service Manual page 11

Self-diagnosis Code
Block Detailed
Function Code
E 6 1 0 0
E 6 1 1 0
E 6 1 1 1
E 6 2 0 0
E 6 2 0 1
HVR-A1J/A1U/A1N/A1E/A1P/A1C
Symptom/State
Difficult to adjust focus
(Cannot initialize focus.)
Zoom operations fault
(Cannot initialize zoom lens.)
Focus lens initializing failure and zoom
lens initializing failure occur simulta-
neously.
Steadyshot function does not work well.
(With pitch angular velocity sensor output
stopped.)
Steadyshot function does not work well.
(With yaw angular velocity sensor output
stopped.)
Inspect the lens block focus MR sensor (Pin ql, wa of CN7006 of
NN-001 board) when focusing is performed when the focus ring is
rotated in the focus manual mode and the focus motor drive circuit
(IC7201 of NN-001 board) when the focusing is not performed.
Inspect the lens block zoom MR sensor (Pin qh, qj of CN7006 of
NN-001 board) when zooming is performed when the zoom switch
is operated and the zoom motor drive circuit (IC7201 of NN-001
board) when zooming is not performed.
Inspect the flexible board for breakage or loose connection.
If not faulty, inspect the focus and zoom motor drive circuit (IC7201
of NN-001 board).
Inspect pitch angular velocity sensor (SE6802 of EE-001 board)
peripheral circuits.
Inspect yaw angular velocity sensor (SE6801 of EE-001 board)
peripheral circuits.
1-4
ENGLISH
ENGLISH
Correction
JAPANESE
JAPANESE