Sony HVR-A1J Service Manual page 246

3-16. RVS Brake Ass'y
1. Removal procedure
1) Remove the RVS brake ass'y 1 from the RVS brake shaft.
2) Remove the RVS brake spring 2 from the hooks A and B.
Key Points in Re-assembling
RVS brake block ass'y
RVS brake shaft
HVR-A1J/A1U/A1N/A1E/A1P/A1C
1 RVS brake block ass'y
RVS brake block ass'y
RVS brake holder
D
6-87
2. Attachment procedure
1) Install the RVS brake spring 2 in the shaft C, and engage the
RVS brake spring 2 on the hooks A and B.
2) Open the RVS brake holder in the direction of the arrow D,
and install the RVS brake ass'y 1 into the RVS brake shaft.
2 RVS brake spring
Hook A
Shaft C
Hook B
RVS brake shaft
Hook B
RVS brake block ass'y
Hook A
RVS brake spring