Sony HVR-A1J Service Manual page 245

3-15. S Reel Table Ass'y
1. Removal procedure
Remove the screw (special head screw M1.4 × 2.0) 1 .
1)
2) Remove the tension regulator band 2 from the S-reel table
ass'y.
3) While freeing the claw at the location in the direction of the
arrow, remove the S-reel table ass'y 3 from the S reel shaft.
S reel shaft
HVR-A1J/A1U/A1N/A1E/A1P/A1C
Claw
1 Screw
(M1.4 × 2.0)
FWD ADJ
2 Tension
regulator
band
2. Attachment procedure
1) Insert the S-reel table ass'y 3 into the S-reel shaft. While
rotating it, snap it in. (Verify that it is locked.)
2) Insert the tension regulator band into the groove of the S-reel
table ass'y. While pushing the FWD ADJ with finger, fix it
with the screw 1 (special head screw M1.4 × 2.0).
Tightening torque: 0.06 ± 0.01 N•m (0.61 ± 0.1 kgf•cm)
6-86
Claw
3 S reel table ass'y
S reel shaft