Sony HVR-A1J Service Manual page 268

Soldering (2)
Two solderings
FP-031
flexible board
T Reel sensor (H9002)
Four solderings
Use the rubber finger tip cover.
Lead-free solder
Wire type
Soldering iron
Soldering iron tip : T1-1BC
Soldering iron tip temperature
Soldering iron tip contacting time: within 2 sec.
Be careful not to create the hollow soldering,
bridge formation, and the holder's claw must
not be melt.
FP-031 Flexible adhesive sheet
HVR-A1J/A1U/A1N/A1E/A1P/A1C
END Sensor (Q9001)
∅
: 0.6
: 941 made by Hakko Mfg.
: 300 ± 10 ° C
Use the rubber finger tip cover.
Lead-free solder
∅
Wire type : 0.6
Soldering iron : 941 made by Hakko Mfg.
Soldering iron tip: T1-1BC
temperature: 300 ± 10 ° C
Soldering iron tip
Soldering iron tip contacting time within
2 sec.
S Reel sensor (H9001)
Four solderings
FP-228 Flexible adhesive sheet
(DEW SENSOR)
TOP Sensor (Q9002)
Use the rubber finger tip cover.
Lead-free solder
Wire type :
Soldering iron : 941 made by Hakko Mfg.
Soldering iron tip: T1-1BC
Soldering iron tip
Soldering iron tip contacting time within
2 sec.
FP-031 Flexible
adhesive sheet
Soldering
Soldering at the
two locations
FP-228 Flexible adhesive sheet
Two solderings
FP-031 flexible
board
∆
0.6
temperature: 300 ± 10 ∞ C
Mecha chasis
HELP