Sony HVR-A1J Service Manual page 258

3-27. T Reel Sensor (H9002), S Reel Sensor (H9001)
1. Removal procedure
1) Remove soldering at the four locations 1 of the T reel sensor,
and remove the T reel sensor (H9002) 2 .
2) Remove soldering at the four locations 3 S reel sensor, and
remove the S reel sensor (H9001) 4 .
2 T Reel sensor (H9002)
1 Four solderings
HVR-A1J/A1U/A1N/A1E/A1P/A1C
2. Attachment procedure
1) Solder four locations 3 S reel sensor and install the S reel
sensor (H9001) 4 in the FP-031 flexible board.
2) Solder four locations 1 S reel sensor and install the T reel
sensor (H9002) 2 in the FP-031 flexible board.
4 S Reel sensor (H9001)
Use the rubber finger tip cover.
Lead-free solder
Wire type
Soldering iron
Soldering iron tip: T1-1BC
Soldering iron tip
Soldering iron tip contacting time within
2 sec.
3 Four solderings
6-99
Soldering
Points to be noted
∆
: 0.6
: 941 made by Hakko Mfg.
temperature: 300 ± 10 ∞ C