Sony HVR-A1J Service Manual page 237

Digital hd video camera recorder
Table of Contents

Advertisement

3-7.
END Sensor (Q9001)
1. Removal procedure
1)
Remove soldering at the two locations 1 of the END sensor
(Q9001).
2)
Disengage the claw 2 and the END sensor (Q9001) 3.
3)
Remove soldering at the two locations 4 of the TOP sensor
(Q9002).
4)
Disengage the claw 5 and the TOP sensor (Q9002) 6.
Soldering
Points to be noted
Use the rubber finger tip cover.
Lead-free solder
Wire type
:
0.6
Soldering iron
: 941 made by Hakko Mfg.
Soldering iron tip: T1-1BC
temperature: 300 ± 10 ° C
Soldering iron tip
Soldering iron tip contacting time within
2 sec.
TOP Sensor (Q9002)
HVR-A1J/A1U/A1N/A1E/A1P/A1C
3 END Sensor (Q9001)
1 Two solderings
Two solderings A
FP-031
flexible board
5 Claw
6-78
2. Attachment procedure
1)
Engage the TOP sensor (Q9002) 6 in the claw 5.
2)
Solder two locations 4 of the TOP sensor (Q9002) and install
the TOP sensor (Q9002) 6 in the FP-031 flexible board.
3)
Engage the END sensor (Q9001) 3 in the claw 2.
4)
Solder two locations 1 of the END sensor (Q9001) and install
the END sensor (Q9001) 3 in the FP-031 flexible board.
END Sensor (Q9001)
2 Claw
6 TOP Sensor (Q9002)
4 Two solderings
FP-031 flexible board

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Hvr-a1pHvr-a1cRmt-831Hvr-a1eHvr-a1uHvr-a1n

Table of Contents