Sony HVR-A1J Service Manual page 253

3-23. GL (T) Block Ass'y, GL Arm (S) Ass'y
1. Removal
1) Remove the GL (T) block ass'y 1 from the GL (T) shaft.
2) Remove the GL (S) block ass'y 2 from the GL arm (S) shaft.
GL (T) shaft
2 GL arm ass'y (S)
GL arm (S) shaft
HVR-A1J/A1U/A1N/A1E/A1P/A1C
1 GL (T) block ass'y
GL arm (T) shaft
2. Attachment procedure
Enter the [ULE] mode.
1)
2) Installing the GL arm (S) ass'y
Install the GL arm (S) ass'y 2 to the GL arm (S) shaft, while
aligning the second gear of the GL rack with the phase
alignment mark.
3) Installing the GL (T) block ass'y
Install the GL (T) block ass'y 1 to the GL (T) shaf, tin the
way that the GL (T) arm plate of the GL (T) block ass'y 1 is
placed parallel to the chassis.
Key Points
in Re-assembling
GL (T) arm plate
is placed parallel
to the chassis.
Key Points
in Re-assembling
GL rack
6-94
GL (T) arm plate
Alignment mark