Storage; Equipment Set-Up - Strong SRT 5302 User Manual

PART 1 • English
heat – Never use or store this product near any heat source such as a radiator heat register, stove, or
any type of equipment or appliance that generates heat, including stereo amplifiers.
Servicing – Refer all servicing to qualified personnel. Attempting to remove the covers or disassemble
the product, could expose you to dangerous high voltage points.
Damage Requiring Service – If you notice any of the conditions described below while using a
specified AC adapter, unplug it from the wall outlet and refer servicing to qualified service personnel:
1. Liquid has been spilled onto the product or some other object has fallen into the
product.
2. The product has been exposed to water.
3. The product does not operate normally despite following operating instructions.
Adjust only the controls described in the operating instructions ad improper
adjustment of other controls could damage the product and require extensive repair
word by a qualified technician.
4. The product has been dropped or damaged in any way.
5. The product exhibits distinct change in performance.
Replacement Parts – When replacement parts are required, make sure that the authorized service
centre uses only parts with the same characteristics as the originals, as recommended by the
manufacturer. Unauthorized substitution of parts could result in fire, electric shock, or create other
hazards.
Safety Check – Upon completion of servicing or repairs, ask the service technicians to perform safety
checks to determine that the product is in good working order.
Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as
vases, shall be placed on the apparatus.
Where the mains plug or all-pole mains switch is used as the disconnect device, the disconnect
device shall remain readily operable.

1.2 Storage

Your receiver and its accessories are stored and delivered in a packaging designed to protect against
electric shocks and moisture. When unpacking it, make sure that all the parts are included and keep
the packaging away from children.
When transporting the receiver from one place to another or if you are returning it under warranty
conditions, make sure to repack the receiver in its original packaging with its accessories. Failing to
comply with such packaging procedures could damage the product and void your warranty.

1.3 Equipment Set-up

We recommend you consult a professional installer to set up your equipment. Otherwise, please
follow these instructions carefully:
Refer to the user manual of your TV and your antenna.
„ „
Make sure that the SCART cable and outdoor components of the antenna are in a
„ „
good condition and the SCART connections are well shielded.
This user manual provides complete instructions for installing and using this receiver. The symbols
serve as follows.
Warning
Tips
MENU
Move to
Indicates warning information
Indicates any other additional important or helpful information
Represents a button on the remote control or the receiver (Bold characters)
Represents a menu item within a window (Italic characters)
3