Remote Control; Default Pin Code: 0000 - Strong SRT 5302 User Manual

PART 1 • English
1. ANT IN
2. To Tv
3. S/PDIf Coaxial
4. Tv SCART Connector
5. Power Cord

3.3 Remote Control

1. q
2. !
3. Pg+/Pg-
4. DTv/vCR
5. INfo
6. vol+/vol-
7. MENU
8. EXIT
9. pq
10. tu
11. oK
12. RECoRD
13. TIMEShIfT
14. 0~9
15. EPg
16. RECAll
17. AUDIo
18. Tv/RADIo
19. fAv
20. fIlE
21. TTX
22. SUBTITlE
23. 5 6
24. Coloured buttons

3.4 Default PIN code: 0000

To connect an antenna for reception of broadcasting signal.
Active antennas can be supported with max. 5 V/50 mA DC.
To connect a TV set or to connect an extra receiver.
To connect your receiver to digital audio amplifier.
To connect your receiver with your TV set using a SCART cable.
Your receiver requires a voltage of 220 – 240 V AC (Auto-
selectable), 50/60 Hz +/-5 %. Make sure to check the power
specification before connecting your receiver to the wall outlet.
Turns the receiver On/Standby
Mutes audio output of the receiver
Page up/down
No function
Shows the actual channel information
Volume up/down
Opens the main menu/In menu you will get one step back
Exits from the menu or sub-menu
Menu Off: Change channel to next/previous
Menu On: Moves the cursor up/down
Menu Off: Decreases/increases the volume level
Menu On: Change settings for specific menus
Menu On: Activates the highlighted menu item
Menu Off: Displays the current channel list
No function
No function
Channel selection or value input
Shows the EPG (Electronic Programme Guide) in TV mode
Back to previous shown channel
Sets the current audio channel to left, right or stereo
Toggles between TV or RADIO mode
Favourite group selection
no function
Shows Teletext on OSD (On Screen Display)
Shows list of subtitled languages
Rewind/Fast forward of video files
for Teletext and other functions
Fig. 4
5