Cleaning The Advanced Beam Array Lenses - Kyocera Mita FS-C5016N Operation Manual

5.3.3

Cleaning the Advanced Beam Array Lenses

If lines, etc., appear on printed copies, the printouts appear dirty, or faint or blurred printouts
are produced, clean the advanced beam array lenses.
There is 1 lens on the main charger unit of each toner container. The following example
explains the procedure to clean the lens on the main charger unit of the black toner
container.
1
Open the left cover.
Left Cover
Figure 5-28
2
Grasp the tab of the green lens cleaner knob. Gently pull the lens cleaner knob out
and push it back in. Repeat this 2 times.
Figure 5-29
5-17
5.3 Cleaning the Printer
Lens Cleaner Knob