Kyocera Mita FS-C5016N Operation Manual page 178

5.2 Replacing the Waste Toner Box
6
Insert the new waste toner box as shown in the figure below. When the box is set
correctly, it will snap into place.
New Waste Toner
Box
Figure 5-15
7
Make sure that the waste toner box is correctly inserted and close the left cover.
Figure 5-16
After replacing the toner containers and the waste toner box, clean the main charger units
and the paper transfer unit. For instructions, see
5-11.
section 5.3 Cleaning the Printer on page
5-10