Kyocera Mita FS-C5016N Operation Manual page 180

5.3 Cleaning the Printer
1
Open the left cover.
Left Cover
Figure 5-18
2
First clean the main charger wire. Grasp the green wire cleaner knob. Gently pull the
wire cleaner knob out and push it back in. Repeat this 2 to 3 times. After cleaning,
make sure you restore the wire cleaner knob to its home position.
Figure 5-19
.
If the wire cleaner knob is not restored to its home position, a band
will print along the length of the page.
Note
Wire Cleaner Knob
5-12