Quick Copy - Kyocera Mita FS-C5016N Operation Manual

3.4 e-MPS
Printing Additional Copies using Quick Copy
To print additional copies of a job stored in the printer:
1
Press the MENU key.
2
Press the or
e-MPS
3
Press the key.
4
Press the or
name (Harold, in this example). The user name is assigned at printing using the
printer driver.
>Quick Copy
Harold
5
Press the ENTER key. A blinking question mark (?) appears before the user name.
>Quick Copy
?Harold
6
Press the or
>Quick Copy
?Arlen
7
Press the ENTER key. The job name entered in the printer driver (Report, in this
example) appear with a blinking question mark (?) before the letters.
>Arlen
?Report
8
Press the or
9
Press the ENTER key. The number of copies to be printed can be set. To increase the
copy count, press the
>Report
Copies
10
Press the ENTER key to finalize the copy count. The printer prints the specified
number of copies for the job.
key repeatedly until e-MPS > appears.
>
key repeatedly until >Quick Copy appears followed by the user
key to display the desired user name, Arlen, in this example.
key to scroll to the desired job title.
key; to decrease the copy count, press the
001
3-22
key.