Setting the Duplex Path
To use this function, the optional duplexer must be installed on the printer.
Note
If the optional duplexer is installed on the printer, you can set whether or not to enable
duplex printing as follows. The default setting is Enable.
1
Display the custom paper type (see
page
3-81) and press the
2
Press the
or
>>Duplex path
Enable
3
Press the ENTER key. A blinking question mark (?) appears.
>>Duplex path
? Enable
4
Select Enable or Disable using the
for each paper type, see
2-21.
5
Press the ENTER key.
6
Press the MENU key. The display returns to Ready.
The custom paper type setting is completed.
section 3.10.9 Creating Custom Paper Type on
key.
key repeatedly until >>Duplex path appears.
or
Chapter 2 Handling Paper, section 2.5 Paper Type on page
3-83
3.10 Paper Handling
key. For details of the default setting