Paper Type - Kyocera Mita FS-C5016N Operation Manual

2.5

Paper Type

The printer is capable of printing under the optimum setting for the type of paper being
used.
Setting the paper type for the paper source from the printer's operator panel will cause the
printer to automatically select the paper source and print in the mode best suited to that type
of paper.
A different paper type setting can be made for each paper source including the MP tray. Not
only can preset paper types be selected, but it is also possible for you to define and select
customized paper types. See
Custom Paper Type on page
The following types of paper can be set.
MP tray
Paper Type
Plain
Transparency
Preprinted
Labels
Bond
Recycled
Vellum
Rough
Letterhead
Color
Prepunched
Envelope
Cardstock
Coated
Thick
High quality
†
Custom 1 (to 8)
Table 2-7
† This is a paper type defined and registered by the user. Up to eight types of user settings may be
defined. For details on
per Type on page 3-81.
Chapter 3 Using the Operator Panel, section 3.10.9 Creating
3-81.
Paper source
Paper Paper
Cassette Weight
Yes Yes
Yes No
Yes Yes
Yes No
Yes Yes
Yes Yes
Yes No
Yes Yes
Yes Yes
Yes Yes
Yes Yes
Yes No
Yes No
Yes No
Yes No
Yes Yes
Yes Yes
Chapter 3 Using the Operator Panel, section 3.10.9 Creating Custom Pa-
2-21
Duplex path
(MP tray available only in
Cassette mode)
Normal 2
Extra Heavy
Normal 2
Heavy 1
Normal 2
Normal 2
Light
Normal 2
Normal 2
Normal 2
Normal 2
Heavy 1
Heavy 2
Normal 2
Heavy 1
Normal 2
Normal 2
Yes: Can be stored No: Cannot be stored
2.5 Paper Type
Yes
No
Yes
No
Yes
Yes
No
Yes
Yes
Yes
Yes
No
No
No
No
Yes
Yes