Setting The Mp Tray Paper Type - Kyocera Mita FS-C5016N Operation Manual

3.10.3 Setting the MP Tray Paper Type

By setting a paper type (plain, recycled, etc.) to the MP tray, you can select the paper on the
MP tray according to the paper type you command on the printer driver. The default setting
is plain paper.
For more information about paper types that can be fed from the MP tray, see
Handling Paper.
1
Press the MENU key.
2
Press the or
Paper Handling >
3
Press the key.
4
Press the or
>MP Tray Type
Plain
5
To change paper type, press the ENTER key. A blinking question mark (?) appears.
>MP Tray Type
? Plain
6
Press the or
through the following paper types:
Plain
Transparency
Preprinted
Labels
Bond
Recycled
Vellum
Rough
Letterhead
Color
Prepunched
Envelope
Cardstock
Coated
Thick
High quality
Custom 1(to 8)
7
When the desired paper type is displayed, press the ENTER key. The paper type is
set to the MP tray.
8
To exit the menu selection, press the MENU key.
key repeatedly until Paper Handling > appears.
key repeatedly until >MP Tray Type appears.
key to display the desired paper type. The message display toggles
3-71
3.10 Paper Handling
Chapter 2