Kyocera Mita FS-C5016N Operation Manual page 182

5.3 Cleaning the Printer
5
Attach the grid cleaner to the printer with the pad facing up.
Figure 5-22
6
Gently pull the main charger handle out and push it back in. Repeat this 2 to 3 times.
These movements clean the grid. After cleaning, make sure you restore the main
charger unit to its home position.
Figure 5-23
.
If the main charger unit is not restored to its home position, the
corresponding color will be printed over the whole page.
Note
5-14
Grid Cleaner
Main Charger Unit