Color Calibration - Kyocera Mita FS-C5016N Operation Manual

3.13 Other Modes

3.13.13 Color Calibration

This printer contains a calibration function that automatically makes adjustments in
compensation for secular changes that occur over time due to variations in the ambient
temperature and humidity. So that the highest quality color printing can be maintained, this
color calibration operation is carried out automatically each time the power to the printer is
turned on. The color calibration operation may be carried out automatically during recovery
from the Sleep mode or during printing.
To manually carry out the color calibration operation, perform the following procedure.
1
Press the MENU key.
2
Press the or
Others
3
Press the key.
4
Press the or
>Service
5
Press the key.
6
Press the or
>>Color
Calibration
7
To let the printer perform color calibration, press the ENTER key. A question mark
(?) appears to let you confirm the execution of calibration.
>>Color
Calibration ?
8
Press the ENTER key. The message display shows Please wait
(Calibrating) and calibration will start.
Please wait
(Calibrating)
9
When calibration is finished, the display returns to Ready.
key repeatedly until Others > appears.
>
key repeatedly until >Service > appears.
>
key repeatedly until >>Color Calibration appears.
3-104