Detaching And Refitting The Primary Transfer Cleaning Unit - Kyocera Mita FS-C5016N - Color LED Printer Service Manual

FS-C5016N

(3) Detaching and refitting the primary transfer cleaning unit

Procedure
1. Remove the primary transfer unit (see page
1-6-14).
2. Pull out the primary transfer cleaning unit
from the main unit frame a little with under-
neath the right 1.
3. Pull out the waste toner outlet 2 which is on
the left side of the primary transfer cleaing
unit from the main unit frame.
4. Remove the primary transfer cleaning unit.
5. Check or replace the primary transfer clean-
ing unit and then refit all the removed parts.
1-6-16
2
Primary transfer
cleaing unit
Figure 1-6-20
1