Kyocera Mita FS-C5016N Operation Manual page 121

3.10 Paper Handling
6
Press the or
through the following paper sizes:
Custom
Oficio II
Folio
16K
C5
A5
B5
ISO B5
A4
Executive
Letter
7
When the desired paper size is displayed, press the ENTER key. The paper size is set
for the paper cassette.
If you selected Custom in step 6, be sure to set the unit of measurement and the
dimensions of the paper as described in the following sections.
Selecting the Unit of Measurement
Then, use the following procedure to set the unit of measurement.
1
Press the key.
2
Press the or
can be selected between millimeters and inches. The current unit of measurement is
displayed (the default setting is mm).
>>Unit
mm
3
Press the ENTER key. A blinking question mark (?) appears.
>>Unit
? mm
4
Select mm or inch using the
5
Press the ENTER key.
Set the dimensions of the paper as described in the next section.
key to display the desired paper size. The message display toggles
key repeatedly until >>Unit appears. The unit of measurement
or key.
3-74