CMOS Setup Utility-Power Management Setup
5.4.9 PnP/PCI Configurations
Section Function
Configures Plug and Play and other PCI bus settings.
Default & Autodetected Settings
The default is for the BIOS to control these functions.
Setting Options & Constraints
If you have a problem after you install an expansion card, set "Reset Con-
figuration Data" to Enabled to rewrite the ESCD.
Don't change the resource settings; they're set to be handled automati-
cally by the BIOS. While you can set them manually, there shouldn't be
any need to do so. The PCI/VGA Palette Snoop item is for PCI display-
card that has a problem displaying a screen image properly at startup. You
should not need to use this feature since the onboard display is the pri-
mary display and if you disable it, the AGP slot will be primary on the
mP4G.
AIMB-540 User's Manual
64