Figure 2.9: Other USB Port
2.3.13 IR Connector JP1
Function: Connector for an Infrared (IR) port module.
Description: The IR connector supports both IrDA and ASKIR infrared
port modules. Follow the module's instructions to install it.
More Information: Please see the Integrated Peripherals section of
"Configuring the CMOS Setup Utility"in Chapter 5 for information.:
IR Connector JP1:The IR connector is for both IrDA and ASKIR port
modules. You must use the CMOS Setup Utility to configure the board to
use the IR feature.
Figure 2.10: IR Connector JP1
2.3.14 Smart Panel Audio Connector JAUDIO1
Function: Connector for the audio features on the Smart Panel..
AIMB-540
User's Manual
20