Connecting Front Panel Components; Completing System Configuration - Advantech AIMB-540 User Manual

Philips-head screwdriver (Crosshead)
Mounting Holes
There are 5 mounting holes on
the motherboard that should cor-
respond to mounting standoffs
on the systemhousing's mother-
board mountingplate.
Mounting holes

4.2.14 Connecting Front Panel Components

After the motherboard is installed in the system housing, you should con-
nect whatever front panel components the housing has to the Front Panel
feature connector on the motherboard.
The figure below indicates the pin assignments of the connector for your
reference.

4.2.15 Completing System Configuration

Once the motherboard is installed in the system housing, you can proceed
to connect or install whatever internal devices you will use to complete
the system. These will at least include an AGP display card and disk
drives and connecting the housing power supply leads. After that, having
replaced the system housing cover, you can connect external peripherals
to complete the process
AIMB-540 User's Manual
Front Panel Connector:
Leads from the front panel
features connect to this header.
48