Integrated Peripherals - Advantech AIMB-540 User Manual

5.4.7 Integrated Peripherals

Main Section Functions
Configures the peripheral features integrated onto the motherboard.
Default & Autodetected Settings
Everything on this screen is an optimized default. The IDE transfer mode
settings are autodetected. The system will work with these defaults. The
port settings are standard PC settings.
Setting Options & Constraints
You can disable onboard devices and change port settings. If you're going
to use a USB keyboard or mouse, you have to enable support for them
from this screen. You can disable the onboard audio and LAN features if
you need to. The IDE HDD Block Mode feature should work with newer
IDE hard disk drives.
The Power On Function line sets what actions will turn the computer on.
The default is just the power button, and there are several other options.
The KB Power ON Password line lets you enter a password to protect the
Keyboard Power On feature.
CMOS Setup Utility-Integrated Peripherals
You may want to set Onboard Serial Port 2 to Disabled if you aren't going
to use the onboard COM2 port. If you install an IR port module, you have
to set the UART Mode Select line to the appropriate IR setting. Check the
module instructions for this information. The following four lines will
display the defaults for the IR mode you select and should work. You can
AIMB-540 User's Manual 62