Fdd, Com, Lpt Port; Pci Pirq [A-D]; Pnp/Pci Configurations; Pnp Os Installed - Advantech AIMB-340F series User Manual

When Enabled, the system will resume from suspend mode if Primary
IDE 0 (1) or Secondary IDE 0 (1) is active. The choice: Enabled, Dis-
abled.

5.6.13 FDD, COM, LPT PORT

When Enabled, the system will resume from suspend mode if FDD, COM
port, or LPT port is active. The choice: Enabled, Disabled.

5.6.14 PCI PIRQ [A-D]#

When Enabled, the system will resume from suspend mode if interrupt
occurs. The choice: Enabled, Disabled.

5.7 PnP/PCI Configurations

5.7.1 PnP OS Installed

Select Yes if you are using a plug and play capable operating system.
Select No if you need the BIOS to configure non-boot device

5.7.2 Reset Configuration Data

Default is Disable. Select Enable to reset Extended System Configura-
tion Data (ESCD) if you have installed a new add-on and system econfig-
uration has caused such a conflict that OS cannot boot.

5.7.3 Resources controlled by:

AIMB-340F User's Manual
Figure 5.6: PnP/PCI configurations screen
52