Hardware Configuration Jumpers; Jumper Jdimmvolt1: Ddr Memory Voltage - Advantech AIMB-540 User Manual

Socket 478 microatx sbc for industrial applications

Table of Contents

3.6 Hardware Configuration Jumpers

This jumper sets the operating voltage supplied to DDR DIMMs installed

in the board's DIMM sockets. The default setting is the normal voltage.

The alternate voltage settings are for use in overclocking. If you are not

overclocking the system, you don't need to change this jumper setting.

Table 3.2: JDIMMVOLT1: DDR Memory Voltage

AIMB-540 User's Manual

Setting

Function

Open

2.5-Volt[Default]

Short 1-2

2.6-Volt

Short 3-4

2.7-Volt

Short 5-6

2.8-Volt

Short 7-8

2.9-Volt

Table of Contents