System Memory Recognition - Advantech AIMB-540 User Manual

Socket 478 microatx sbc for industrial applications

Table of Contents

Press the module fully into the socket so that the socket retaining

arms swing up and engage the retention notches at each end of the

module.

Following the configuration you have chosen, repeat this procedure if

necessary so that all modules are installed. Once the modules are

installed, system memory installation is complete.

Module Installation:

Modules will only

insert in one orienta-

tion. The width of the

two edge connector

sections vary slightly

and prevent incorrect

insertion.

Module Installation:

All modules insert in the

DIMM sockets in the same

way:

1. Align the module to the

socket.

2. The socket retaining

arms should rotate up and

engage the module's

retaining notches as you

press it into the socket.

3. The retaining arms

must engage for the mod-

ule to be properly

installed.

4.2.11 System Memory Recognition

The BIOS will automatically recognize the installed memory and config-

ure the CMOS Setup Utility. No other action is required to complete sys-

tem memory installation.

AIMB-540 User's Manual

Table of Contents