Ps/2 Ports; Parallel Port - Advantech AIMB-540 User Manual

2.3.18 PS/2 Ports

Function: Connecting PS/2 devices to the system.
Description: The PS/2 ports are for a system keyboard and mouse or
other pointing device. Do not connect or disconnect PS/2 devices when
the system is turned on.
More Information: See the Advanced Boot Options section of "Config-
uring the CMOS Setup Utility" in Chapter 5 for information on adjusting,
related settings.
PS/2 Ports: Do not plug or unplug devices when the system is turned on.
Figure 2.14: PS/2 Ports

2.3.19 Parallel Port

Function: Connecting a device with a parallel interface to the system.
Description: The parallel port is generally used to connect a printer to the
system. The port supports common parallel port modes and allows bidi-
rectional communication. Use an IEEE 1284 compliant cable with the
default ECP mode configuration.
More Information: See the Integrated Peripherals section of "Configur-
ing the CMOS Setup Utility" in Chapter 5 for information on adjusting
port settings.
Parallel port: The default mode is ECP, configured as EPP 1.9, DMA 3.
1284 compliant.
Figure 2.15: Parallel port
23 Chapter 2