Front Panel Connectors (Jfp1/Jfp2); Atx Soft Power Switch ((Jfp1/Pwr_Btn)); Reset (Jfp1/Rst_Btn); Hdd Led (Jfp2/Hdd_Led) - Advantech AIMB-232G2-U7A1E User Manual

2.8

Front Panel Connectors (JFP1/JFP2)

There are several headers for monitoring and controlling the AIMB-232.
2.8.1

ATX soft power switch ((JFP1/PWR_BTN))

If your computer case is equipped with an ATX power supply, you should connect the
power on/off button on your computer case to ((JFP1/ PWR_BTN)),for convenient
power on and off.
2.8.2

Reset (JFP1/RST_BTN)

Many computer cases offer the convenience of a reset button. Connect the wire for
the reset button.
2.8.3

HDD LED (JFP2/HDD_LED)

You can connect an LED to connector (JFP2/HDDLED) to indicate when the HDD is
active.
2.8.4

External speaker (JFP2/SPEAKER)

JFP2/Speaker is a 4-pin connector for an external speaker. If there is no external
speaker, the AIMB-232 provides an onboard buzzer as an alternative. To enable the
buzzer, set pins 7 & 10 as closed.
17 AIMB-232 User Manual